Integrated Electrochemical Oxidation and Biodegradation for Remediation of a Neonicotinoid Insecticide Pollutant.

A novel integrated electrochemical oxidation (EO) and bacterial degradation (BD) technique was employed for the remediation of the chloropyridinyl and chlorothiazolyl classes of neonicotinoid (NEO) insecticides in the environment. Imidacloprid (IM), clothianidin (CL), acetamiprid (AC), and thiamethoxam (TH) were chosen as the target NEOs. Pseudomonas oleovorans SA2, identified through 16S rRNA gene analysis, exhibited the potential for BD. In EO, for the selected NEOs, the total percentage of chemical oxygen demand (COD) was noted in a range of 58-69%, respectively. Subsequently, in the biodegradation of EO-treated NEOs (BEO) phase, a higher percentage (80%) of total organic carbon removal was achieved. The optimum concentration of NEOs was found to be 200 ppm (62%) for EO, while for BEO, the COD efficiency was increased up to 79%. Fourier-transform infrared spectroscopy confirms that the heterocyclic group and aromatic ring were degraded in the EO and further utilized by SA2. Gas chromatography-mass spectroscopy indicated up to 96% degradation of IM and other NEOs in BD (BEO) compared to that of EO (73%). New intermediate molecules such as silanediamine, 1,1-dimethyl-n,n'-diphenyl produced during the EO process served as carbon sources for bacterial growth and further mineralized. As a result, BEO enhanced the removal of NEOs with a higher efficiency of COD and a lower consumption of energy. The removal efficiency of the NEOs by the integrated approach was achieved in the order of AC > CL > IM > TH. This synergistic EO and BD approach holds promise for the efficient detoxification of NEOs from polluted environments.

Micro and nano plastics in food: A review on the strategies for identification, isolation, and mitigation through photocatalysis, and health risk assessment.

Over the past few years, it has become increasingly evident that microplastic pollutant heavily contaminates water sources, posing a potential threat to both human and wildlife. These plastic pollutants do not get degraded efficiently by natural processes and the existing traditional treatment methods are incapable of fully eradicating them. In this regard, degradation of microplastic contaminants through photocatalytic methods has emerged as a powerful technique. Unfortunately, only a limited number of investigations have been reported in the field of photocatalytic degradation of microplastics. This comprehensive assessment focuses on the detailed analysis of the latest cutting edge engineered technologies aimed at efficiently separating, identifying microplastic contaminants present in food samples and degrading them through photocatalysis. Moreover, detailed information on various instrumental techniques that can be adopted to analyze the isolated micro sized plastic particles has been discussed. The assessment and degradation of these micro contaminants through photocatalytic methods is still in juvenile stage and there are lot of rooms to be explored. The need for profound contemplation on methods to degrade them through photocatalytic approaches as well as their possible health risks to humans motivated us to bring out this review.

A review of chemical signaling pathways in the quorum sensing circuit of Pseudomonas aeruginosa.

Pseudomonas aeruginosa, an increasingly common competitive and biofilm organism in healthcare infection with sophisticated, interlinked and hierarchic quorum systems (Las, Rhl, PQS, and IQS), creates the greatest threats to the medical industry and has rendered prevailing chemotherapy medications ineffective. The rise of multidrug resistance has evolved into a concerning and potentially fatal occurrence for human life. P. aeruginosa biofilm development is assisted by exopolysaccharides, extracellular DNA, proteins, macromolecules, cellular signaling and interaction. Quorum sensing is a communication process between cells that involves autonomous inducers and regulators. Quorum-induced infectious agent biofilms and the synthesis of virulence factors have increased disease transmission, medication resistance, infection episodes, hospitalizations and mortality. Hence, quorum sensing may be a potential therapeutical target for bacterial illness, and developing quorum inhibitors as an anti-virulent tool could be a promising treatment strategy for existing antibiotics. Quorum quenching is a prevalent technique for treating infections caused by microbes because it diminishes microbial pathogenesis and increases microbe biofilm sensitivity to antibiotics, making it a potential candidate for drug development. This paper examines P. aeruginosa quorum sensing, the hierarchy of quorum sensing mechanism, quorum sensing inhibition and quorum sensing inhibitory agents as a drug development strategy to supplement traditional antibiotic strategies.

Electrochemical oxidation of azo dyes degradation by RuO2-IrO2-TiO2 electrode with biodegradation Aeromonas hydrophila AR1 and its degradation pathway: An integrated approach.

Azo dyes are the most varied class of synthetic chemicals with non-degradable characteristics. They are complex compounds made up of many different parts. It was primarily utilized for various application procedures in the dyeing industry. Therefore, it's crucial to develop an economical and environmentally friendly approach to treating azo dyes. Our present investigation is an integrated approach to the electrooxidation (EO) process of azo dyes using RuO2-IrO2-TiO2 (anode) and titanium mesh (cathode) electrodes, followed by the biodegradation process (BD) of the treated EO dyes. Chemical oxygen demand (COD) removal efficiency as follows MB (55%) ≥ MR (45%) ≥ TB (38%) ≥ CR (37%) correspondingly. The fragment generated during the degradation process which was identified with high-resolution mass spectrometry (HRMS) and its degradation mechanism pathway was proposed as demethylation reaction and N-N and C-N/C-S cleavage reaction occurs during EO. In biodegradation studies by Aeromonas hydrophila AR1, the EO treated dyes were completely mineralized aerobically which was evident by the COD removal efficiency as MB (98%) ≥ MR (92.9%) ≥ TB (88%) ≥ CR (87%) respectively. The EO process of dyes produced intermediate components with lower molecular weights, which was effectively utilized by the Aeromonas hydrophila AR1 and resulted in higher degradation efficiency 98%. We reported the significance of the enhanced approach of electrochemical oxidation with biodegradation studies in the effective removal of the pollutants in dye industrial effluent contaminated water environment.

Intimate coupling of gC3N4/CdS semiconductor on eco-friendly biocarrier loofah sponge for enhanced detoxification of ciprofloxacin.

Ciprofloxacin is one of the antibiotics predominantly used to treat bacterial infections, however excess usage, and release of antibiotic from various sources to the environment can cause severe risks to human health since it was considered as emerging pollutant. This study deals with the intimately coupled photocatalysis and biodegradation (ICPB) of ciprofloxacin using gC3N4/CdS photocatalytic semiconductor and eco-friendly renewable loofah sponge as biocarrier in the ICPB. The photocatalyst gC3N4/CdS was prepared and their synergistic photocatalytic degradation of ciprofloxacin were assessed and the results shows that gC3N4/CdS (20%) exhibit 79% degradation efficiency in 36 h. Further ICPB exhibited enhanced ciprofloxacin degradation 95% at 36 h. The 62.4% and 81.1% of chemical oxygen demand (COD) removal was obtained in the photocatalysis and ICPB respectively. Enhanced degradation of ciprofloxacin and COD removal was due to the synergetic photoelectrons generated from the gC3N4/CdS (20%) transferred to the bacterial communities which intensely mineralize the degradation products produced from the photocatalysis process. Furthermore, production of hydroxyl •OH and superoxide radical anion O2• were identified actively involved in the degradation of ciprofloxacin. The biocarrier loofah sponge provided favourable environment to the bacterial communities for the formation of biofilm and production of extracellular polymeric substances (EPS). Excess quantity of EPS production in the ICPB helps in the prevention of toxicity of photocatalyst to bacterial communities as well as facilitate the extracellular electron transfer process. This work provides a novel path for enhanced degradation of ciprofloxacin using eco-friendly, low cost and renewable biocarrier loofah sponge in the ICPB system.

Sunlight-driven intimately coupled photocatalysis and biodegradation (SDICPB): A sustainable approach for enhanced detoxification of triclosan.

Triclosan is considered as recalcitrant contaminant difficult to degrade from the contaminated wastewater. Thus, promising, and sustainable treatment method is necessary to remove triclosan from the wastewater. Intimately coupled photocatalysis and biodegradation (ICPB) is an emerging, low-cost, efficient, and eco-friendly method for the removal of recalcitrant pollutants. In this study BiOI photocatalyst coated bacterial biofilm developed at carbon felt for efficient degradation and mineralization of triclosan was studied. Based on the characterization of BiOI prepared using methanol had lower band gap 1.85 eV which favors lower recombination of electron-hole pair and higher charge separation which ascribed to enhanced photocatalytic activity. ICPB exhibits 89% of triclosan degradation under direct sunlight exposure. The results showed that production of reactive oxygen species hydroxyl radical and superoxide radical anion played crucial role in the degradation of triclosan into biodegradable metabolites further the bacterial communities mineralized the biodegradable metabolites into water and carbon dioxide. The confocal laser scanning electron microscope results emphasized that interior of the biocarrier shows a large number of live bacterial cells existing in the photocatalyst-coated carrier, where the little toxic effect on bacterial biofilm occurred on the exterior of the carrier. The extracellular polymeric substances characterization result remarkable confirms that which could act as sacrificial agent of photoholes further helped by preventing the toxicity to the bacterial biofilm from the reactive oxygen species and triclosan. Hence, this promising approach can be a possible alternative method for the wastewater treatment polluted with triclosan.

Sequential photo electro oxidation and biodegradation of textile effluent: Elucidation of degradation mechanism and bacterial diversity.

Textile effluent contains a highly toxic and refractory azo dyes. Eco-friendly method for efficient decolorization and degradation of textile effluent is essential. In the present study, treatment of textile effluent was carried through sequential electro oxidation (EO) and photo electro oxidation (PEO) using RuO2-IrO2 coated titanium electrode as an anode and cathode followed by biodegradation. The pre-treatment of textile effluent by photo electro oxidation for 14 h exhibited 92% of decolorization. Subsequent biodegradation of the pre-treated textile effluent enhanced the reduction of chemical oxygen demand to 90%. Metagenomics results exhibited that Flavobacterium, Dietzia, Curtobacterium, Mesorhizobium, Sphingobium, Streptococcus, Enterococcus, Prevotellaand Stenotrophomonas bacterial communities majorly involved in the biodegradation of textile effluent. Hence, integrating sequential photo electro oxidation and biodegradation proposed an efficient and eco-friendly approach for treating textile effluent.

Fabrication of novel BiPO4/Ag3PO4@rGO hybrid composite for effective detoxification of tetracycline.

A practical photocatalytic method using efficient and nontoxic is crucial for wastewater treatment technology. The present study deals with the preparation of BiPO4/Ag3PO4@rGO heterojunction through hydrothermal process and utilized it for efficient degradation and detoxification of Tetracycline (TCL) antibiotic. The prepared composite was characterized by X-ray diffraction, UV-vis DRS spectroscopy, Scanning electron microscope (SEM), Transmission electron microscope (TEM) and XPS (X-ray photoelectron spectroscopy). From our study, it was evident that the addition of Ag3PO4 extensively improved the photocatalytic efficiency of BiPO4 with a degradation of the rate of 94.6% (k = 0.01783 min-1) towards TCL under visible light within 90 min irradiation. The heterojunction energy-band theory has been adopted to understand the mechanism of degradation. The improved efficiency was ascribed to the excellent charge transfer between the interface of p-n heterojunction and the improvement in the absorption of light. Furthermore, LC/ESI-MS/MS (liquid chromatography-electrospray ionization tandem mass spectrometry) carried out TCL degradation product identification to propose the degradation pathway. The biotoxicity assessment studies revealed that effective detoxification was observed during degradation. Thus, this work extends new methods for developing new BiPO4-based heterojunction composites to meet the requirements for remediation of a contaminated aqueous environment.

Intimately coupled gC3N4 photocatalysis and mixed culture biofilm enhanced detoxification of sulfamethoxazole: Elucidating degradation mechanism and toxicity assessment.

In recent years, wide spread of antibiotic-resistant microorganisms and genes emerging globally, an eco-friendly method for efficient degradation of antibiotics from the polluted environment is essential. Intimately coupled photocatalysis and biodegradation (ICPB) using gC3N4 for enhanced degradation of sulfamethoxazole (SMX) was investigated. The gC3N4 were prepared and coated on the carbon felt. The mixed culture biofilm was developed on the surface as a biocarrier. The photocatalytic degradation showed 74%, and ICPB exhibited 95% SMX degradation efficiency. ICPB showed superior visible light adsorption, photocatalytic activity, and reduced charge recombination. The electron paramagnetic resonance spectrum confirms that the generation of •OH and O2• radicals actively participated in the degradation of SMX into biodegradable intermediated compounds, and then, the bacterial communities present in the biofilm mineralized the biodegradable compound into carbon dioxide and water. Moreover, the addition of NO3-, PO4-, and Cl- significantly enhanced the degradation efficiency by trapping the surface electron. Stability experiments confirmed that gC3N4 biohybrid can maintain 85% SMX degradation efficiency after 5 consecutive recycling. Extracellular polymeric substances characterization results show that biohybrid contains 47 mg/L, 14 mg/L, and 13 mg/L protein, carbohydrate, and humic acid, respectively, which can protect the bacterial communities from the antibiotic toxicity and reactive oxygen species. Furthermore, biotoxicity was investigated using degradation products on E.coli and results revealed 83% detoxification efficiency. Overall, this study suggested that gC3N4 photocatalyst in an ICPB can be used as a promising eco-friendly method to degrade sulfamethoxazole efficiently.

Integrated approach of photo-assisted electrochemical oxidation and sequential biodegradation of textile effluent.

Synthetic azo dyes are extensively used in the textile industries, which are being released as textile effluent into the environment presence of azo dyes in the environment is great environmental concern therefore treatment of textile effluent is crucial for proper release of the effluent into the environment. Electrochemical oxidation (EO) is extensively used in the degradation of pollutants because of its high efficiency. In this study, photo-assisted electrooxidation (PEO) followed by biodegradation of the textile effluent was evaluated. The pretreatment of textile effluent was conducted by EO and PEO in a tubular flow cell with TiO2-Ti/IrO2-RuO2 anode and titanium cathode under different current densities (10, 15, and 20 mA cm-2). The chemical oxygen demand level reduced from 3150 mg L-1 to 1300 and 600 mg L-1under EO and PEO, respectively. Furthermore, biodegradation of EO and PEO pretreated textile effluent shows reduction in chemical oxygen demand (COD) from 1300 mg L-1 to 900 mg L-1and 600 mg L-1to 110 mg L-1, respectively. The most abundant genera were identified as Acetobacter, Achromobacter, Acidaminococcus, Actinomyces, and Acetomicrobium from the textile effluent. This study suggests that an integrated approach of PEO and subsequent biodegradation might be an effective and eco-friendly method for the degradation of textile effluent.

Enhanced biological nitrate removal by gC3N4/TiO2 composite and role of extracellular polymeric substances.

The biological denitrification in the presence of gC3N4 doped TiO2 composite was investigated through series of batch experiment. gC3N4 doped TiO2 was synthesized and characterized by FT-IR, XRD, SEM-EDAX and the prepared composite used as electron donor for the enhancement biological denitrification. The role of extracellular polymeric substances in the biological nitrate reduction and electron transfer process has been elucidated. The XRD result confirms that TiO2 nanoparticle has 80% anatase and 20% rutile phase. The gC3N4 shows the diffraction peaks at 27.57°, corresponds to the diffraction planes of (002) the hexagonal graphitic carbon nitride. The SEM image of modified gC3N4/TiO2 nanocomposites showed agglomerated small spherical TiO2 nanoparticles attached on the surface of gC3N4. The highest level of nitrate removal was 90% (from 100 mg/L to 10 mg/L nitrate) in gC3N4/TiO2 nanocomposite in the 15% wt TiO2 doped gC3N4. The nitrate reduction in the biofilm with gC3N4 doped TiO2 composite have significantly enhanced the nitrate reduction than the control. Photoexcited electrons were generated from gC3N4 doped TiO2 photocatalyst act as excellent electron donor to the microbial communities. Extracellular polymeric substances acted as a passing media for microbial extracellular electron transfer and protective barrier for microbes. The electroactive microbes were harvested electrons from the gC3N4 doped TiO2 composite under irradiation and enhancing the biological nitrate reduction. Overall, the present study suggests that insight into the mechanism of photoexcited electron facilitated biological nitrate reduction and role of extracellular polymeric substances. The successful integration of gC3N4 doped TiO2 photocatalyst and biofilm is a promising technology for nitrate removal.

Review on polycyclic aromatic hydrocarbons (PAHs) migration from wastewater.

Rapidly increasing global population and increased civilization has increased burden on potable water resources and results in larger volumes of wastewater. Physical wastewater management techniques has advanced for domestic usage and commercial effluent new conceptions about imminent wastewater treatment have been acclaimed for highly carcinogenic polycyclic aromatic hydrocarbon (PAH) compounds. The present review study emphasis on the assessment of several accessible PAHs treatment methods used in wastewater management. The elementary principles, contextual remediation mechanisms and recent development in PAHs removal practices have also been precisely explained. The comprehensive information regarding sources, dispersal, classification, physicochemical properties, PAHs toxicity for humans and aquatics life, conventional treatment procedures, and advanced oxidation processes specified can assist us to identify the PAHs problem and their intensity. The performance evaluation of different removal techniques are discussed in details and found that highest PAHs' reduction for 5-or 6-ring (99%,) while 3-ring (79% reduction) with oxidant dose of 1.64 mL/L using titanium catalyst. In case of MWTPs, with secondary techniques, the average removal efficiency found in the range of 81.1-92.9% while for AOPs are 32-99.3%. Here, overall yield through AOPs most suitable if process used with some catalyst enhanced the yield as well and suitable for high ring as well as low ring PAHs. Among various processes, advanced oxidation and catalytic oxidation processes are the most valuable and promising techniques for PAHs removal. Based on the given evidences, the AOPs coupled with catalysts have been decided as the most competent design for wastewater PAHs treatment.

Sequential electrochemical oxidation and bio-treatment of the azo dye congo red and textile effluent.

Textile effluent is often difficult to manage as it contains a high concentration of toxic and recalcitrant synthetic dyes. In this study, congo Red and textile effluent were treated by electrochemical oxidation using RuO2-IrO2 coated titanium electrode as an anode followed by biodecolorization using Pseudomonas stutzeri MN1 and Acinetobacter baumannii MN3. Effluent pre-treatment is often necessary to minimize the inhibitory effects of textile dyes on dye degrading bacterial during bio-treatment. The pre-treatment of Congo Red by electrochemical oxidation for 10 min resulted in a decolorization rate of 98% at a pH, NaCl concentration, and current density of 7, 2 g L-1, and 20 mA cm-2. Subsequent bio-treatment of the pretreated Congo Red enhanced the biodegradation to 93%. The COD removal efficiency in real textile effluent following electrochemical pretreatment and biological treatment using bacterial consortium were 3.8% and 93%, respectively. Therefore, integrating electrochemical oxidation and microbial consortia offers an effective and environmentally friendly approach for treating complex industrial effluents.

Treatment of soak liquor and bioelectricity generation in dual chamber microbial fuel cell.

The discharge of untreated soak liquor from tannery industry causes severe environmental pollution. This study is characterizing the soak liquor as a substrate in the microbial fuel cell (MFC) for remediation along with electricity generation. The dual chamber MFC was constructed and operated. Potassium permanganate was used as cathode solution and carbon felt electrode as anodic and cathodic material, respectively. The soak liquor was characterized by electrochemical studies viz., cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and polarization studies, respectively. The removal percentage of protein, lipid, and chemical oxygen demand (COD) were measured before and after treatment with MFC. The results of MFC showed a highest current density of 300 mA/cm2 and a power density of 92 mW/m2. The removal of COD, protein, and lipid were noted as 96, 81, and 97% respectively during MFC process. This MFC can be used in tannery industries for treating soak liquor and simultaneous electricity generation.

Managing wastes as green resources: cigarette butt-synthesized pesticides are highly toxic to malaria vectors with little impact on predatory copepods.

The development of novel mosquito control tools is a key prerequisite to build effective and reliable Integrated Vector Management strategies. Here, we proposed a novel method using cigarette butts for the synthesis of Ag nanostructures toxic to young instars of the malaria vector Anopheles stephensi, chloroquine (CQ)-resistant malaria parasites Plasmodium falciparum and microbial pathogens. The non-target impact of these nanomaterials in the aquatic environment was evaluated testing them at sub-lethal doses on the predatory copepod Mesocyclops aspericornis. Cigarette butt-synthesized Ag nanostructures were characterized by UV-vis and FTIR spectroscopy, as well as by EDX, SEM and XRD analyses. Low doses of cigarette butt extracts (with and without tobacco) showed larvicidal and pupicidal toxicity on An. stephensi. The LC50 of cigarette butt-synthesized Ag nanostructures ranged from 4.505 ppm (I instar larvae) to 8.070 ppm (pupae) using smoked cigarette butts with tobacco, and from 3.571 (I instar larvae) to 6.143 ppm (pupae) using unsmoked cigarette butts without tobacco. Smoke toxicity experiments conducted against adults showed that unsmoked cigarette butts-based coils led to mortality comparable to permethrin-based positive control (84.2 and 91.2%, respectively). A single treatment with cigarette butts extracts and Ag nanostructures significantly reduced egg hatchability of An. stephensi. Furthermore, the antiplasmodial activity of cigarette butt extracts (with and without tobacco) and synthesized Ag nanostructures was evaluated against CQ-resistant (CQ-r) and CQ-sensitive (CQ-s) strains of P. falciparum. The lowest IC50 values were achieved by cigarette butt extracts without tobacco, they were 54.63 µg/ml (CQ-s) and 63.26 µg/ml (CQ-r); while Ag nanostructure IC50 values were 72.13 µg/ml (CQ-s) and 77.33 µg/ml (CQ-r). In MIC assays, low doses of the Ag nanostructures inhibited the growth of Bacillus subtilis, Klebsiella pneumoniae and Salmonella typhi. Finally, the predation efficiency of copepod M. aspericornis towards larvae of An. stephensi did not decrease in a nanoparticle-contaminated environment, if compared to control predation assays. Overall, the present research would suggest that an abundant hazardous waste, such as cigarette butts, can be turned to an important resource for nanosynthesis of highly effective antiplasmodials and insecticides.

Role of calcium-depositing bacteria Agrobacterium tumefaciens and its influence on corrosion of different engineering metals used in cooling water system.

The present investigation deals with the role of calcium-depositing bacterial community on corrosion of various engineering metals, namely, brass alloy (BS), copper (Cu), stainless steel (SS) and mild steel (MS). Based on the corrosion behavior, Agrobacterium tumefaciens EN13, an aerobic bacterium is identified as calcium-depositing bacteria on engineering metals. The results of the study are supported with biochemical characterization, 16S rRNA gene sequencing, calcium quantification, weight loss, electrochemical (impedance and polarization) and surface analysis (XRD and FTIR) studies. The calcium quantification study showed carbonate precipitation in abiotic system/biotic system as 50 and 700 ppm, respectively. FTIR results too confirmed the accumulation of calcium deposits from the environment on the metal surface by EN13. Electrochemical studies too supported the corrosion mechanism by showing a significant increase in the charge transfer resistance (Rct) of abiotic system (44, 33.6, 45, 29.6 Ω cm2) than compared to biotic system (41, 10.1 29 and 25 Ω cm2). Hence, the outcome of the present study confirmed the enhanced bioaccumulation behavior of calcium by the strain, EN13.

Biosurfactant and enzyme mediated crude oil degradation by Pseudomonas stutzeri NA3 and Acinetobacter baumannii MN3.

The present study focuses on the optimization of biosurfactant (BS) production using two potential biosurfactant producer Pseudomonas stutzeri NA3 and Acinetobacter baumannii MN3 and role of enzymes in the biodegradation of crude oil. The optimal conditions for P. stutzeri NA3 and A. baumannii MN3 for biodegradation were pH of 8 and 7; temperature of 30 and 40 °C, respectively. P. stutzeri NA3 and A. baumannii MN3 produced 3.81 and 4.68 g/L of BS, respectively. Gas chromatography mass spectrometry confirmed that BS was mainly composed of fatty acids. Furthermore, the role of the degradative enzymes, alkane hydroxylase, alcohol dehydrogenase and laccase on biodegradation of crude oil are explained. Maximum biodegradation efficiency (BE) was recorded for mixed consortia (86%) followed by strain P. stutzeri NA3 (84%). Both bacterial strains were found to be vigorous biodegraders of crude oil than other biosurfactant-producing bacteria due to their enzyme production capabilities and our results suggests that the bacterial isolates can be used for effective degradation of crude oil within short time periods.

Electrochemical decolorization of methyl red by RuO2-IrO2-TiO2 electrode and biodegradation with Pseudomonas stutzeri MN1 and Acinetobacter baumannii MN3: An integrated approach.

Textile effluent consists of enormous quantities of toxic dyes, which are being discharged into natural aqueous system and thus contaminate the water quality. Hence it is important to develop an eco-friendly and cost effective technology to treat the dyes contaminated wastewater. In this research, an integrated approach of electrochemical oxidation (EO) and biodegradation process (BP) was studied of methyl red (MR) dye. In EO, RuO2-IrO2-TiO2 is used as anode and titanium mesh electrode as cathode. This was followed by BP of the treated EO effluent. Various parameters viz., pH (5-10), sodium chloride concentrations (NaCl) (1-5 g L-1) and current density (10-30 mA cm2) were optimized. The results of the EO showed 99.96% of MR decolorization within 10 min at pH of 5, NaCl of 2 g L-1 and current density of 30 mA cm2. The EO treated MR was further treated by BP Pseudomonas stutzeri MN1, Acinetobacter baumannii MN3 and mixed consortia of MN1 and MN3. The out of three treatments, the results of mixed consortium BP showed 90% removal of COD at the end of 24 h. The phytotoxic evaluation using Vigna radiata seeds confirmed the toxicity of untreated MR solution, whereas, 100% germination was observed in treated (biodegraded) MR solution. Overall these results evidenced that MR dye was completely decolorized and mineralized by EO and BP within 10 min and 24 h respectively. Hence, this integrated approach can be used as an effective degradation method to treat dyes in the textile industry.